A low-cost autonomous rover for polar science

Research output: Contribution to journalJournal articleResearchpeer-review

Standard

A low-cost autonomous rover for polar science. / Hoffman, Andrew O.; Christian Steen-Larsen, Hans; Christianson, Knut; Hvidberg, Christine.

In: Geoscientific Instrumentation, Methods and Data Systems, Vol. 8, No. 1, 11.06.2019, p. 149-159.

Research output: Contribution to journalJournal articleResearchpeer-review

Harvard

Hoffman, AO, Christian Steen-Larsen, H, Christianson, K & Hvidberg, C 2019, 'A low-cost autonomous rover for polar science', Geoscientific Instrumentation, Methods and Data Systems, vol. 8, no. 1, pp. 149-159. https://doi.org/10.5194/gi-8-149-2019

APA

Hoffman, A. O., Christian Steen-Larsen, H., Christianson, K., & Hvidberg, C. (2019). A low-cost autonomous rover for polar science. Geoscientific Instrumentation, Methods and Data Systems, 8(1), 149-159. https://doi.org/10.5194/gi-8-149-2019

Vancouver

Hoffman AO, Christian Steen-Larsen H, Christianson K, Hvidberg C. A low-cost autonomous rover for polar science. Geoscientific Instrumentation, Methods and Data Systems. 2019 Jun 11;8(1):149-159. https://doi.org/10.5194/gi-8-149-2019

Author

Hoffman, Andrew O. ; Christian Steen-Larsen, Hans ; Christianson, Knut ; Hvidberg, Christine. / A low-cost autonomous rover for polar science. In: Geoscientific Instrumentation, Methods and Data Systems. 2019 ; Vol. 8, No. 1. pp. 149-159.

Bibtex

@article{bf99114c1abb4dc099fb26d3a626f2ec,
title = "A low-cost autonomous rover for polar science",
abstract = "We present the developmental considerations, design, and deployment of an autonomous modular terrestrial rover for ice-sheet exploration that is inexpensive, easy to construct, and allows for instrumentation customization. The total construction cost for this rover is less than USD 3000, approximately one-tenth the cost of existing platforms, and it can be built using facilities frequently available at academic institutions (machine shop, 3-D printer, open-source hardware and software). Instrumentation deployed on this rover can be customized; the rover presented in this study was equipped with a dual-frequency GPS receiver and a digital SLR camera for constructing digital elevation models using structure-from-motion (SfM) photogrammetry. We deployed this prototype rover on the Northeast Greenland Ice Stream to map local variations in snow accumulation and surface topography. The rover conducted four autonomous missions based out of the East Greenland Ice-Core Project (EastGRIP) camp during July 2017, measuring surface elevation transects across the hazardous ice-stream shear margins. During these missions, the rover proved capable of driving over 20km on a single charge with a drawbar pull of 250N, sufficient to tow instrumentation of up to 100kg. The rover also acquired photographs that were subsequently used to construct digital elevation models of a site monitored for spatiotemporal variability in snow accumulation, demonstrating adequate stability for high-resolution imaging applications. Due to its low cost, low-power requirements, and simple modular design, mass deployments of this rover design are practicable. Operation of the rover in hazardous areas circumvents the substantial expense and risk to personnel associated with conventional, crewed deployments. Thus, this rover is an investigatory platform that enables direct exploration of polar environments considered too hazardous for conventional field expeditions.",
author = "Hoffman, {Andrew O.} and {Christian Steen-Larsen}, Hans and Knut Christianson and Christine Hvidberg",
year = "2019",
month = jun,
day = "11",
doi = "10.5194/gi-8-149-2019",
language = "English",
volume = "8",
pages = "149--159",
journal = "Geoscientific Instrumentation, Methods and Data Systems",
issn = "2193-0856",
publisher = "Copernicus GmbH",
number = "1",

}

RIS

TY - JOUR

T1 - A low-cost autonomous rover for polar science

AU - Hoffman, Andrew O.

AU - Christian Steen-Larsen, Hans

AU - Christianson, Knut

AU - Hvidberg, Christine

PY - 2019/6/11

Y1 - 2019/6/11

N2 - We present the developmental considerations, design, and deployment of an autonomous modular terrestrial rover for ice-sheet exploration that is inexpensive, easy to construct, and allows for instrumentation customization. The total construction cost for this rover is less than USD 3000, approximately one-tenth the cost of existing platforms, and it can be built using facilities frequently available at academic institutions (machine shop, 3-D printer, open-source hardware and software). Instrumentation deployed on this rover can be customized; the rover presented in this study was equipped with a dual-frequency GPS receiver and a digital SLR camera for constructing digital elevation models using structure-from-motion (SfM) photogrammetry. We deployed this prototype rover on the Northeast Greenland Ice Stream to map local variations in snow accumulation and surface topography. The rover conducted four autonomous missions based out of the East Greenland Ice-Core Project (EastGRIP) camp during July 2017, measuring surface elevation transects across the hazardous ice-stream shear margins. During these missions, the rover proved capable of driving over 20km on a single charge with a drawbar pull of 250N, sufficient to tow instrumentation of up to 100kg. The rover also acquired photographs that were subsequently used to construct digital elevation models of a site monitored for spatiotemporal variability in snow accumulation, demonstrating adequate stability for high-resolution imaging applications. Due to its low cost, low-power requirements, and simple modular design, mass deployments of this rover design are practicable. Operation of the rover in hazardous areas circumvents the substantial expense and risk to personnel associated with conventional, crewed deployments. Thus, this rover is an investigatory platform that enables direct exploration of polar environments considered too hazardous for conventional field expeditions.

AB - We present the developmental considerations, design, and deployment of an autonomous modular terrestrial rover for ice-sheet exploration that is inexpensive, easy to construct, and allows for instrumentation customization. The total construction cost for this rover is less than USD 3000, approximately one-tenth the cost of existing platforms, and it can be built using facilities frequently available at academic institutions (machine shop, 3-D printer, open-source hardware and software). Instrumentation deployed on this rover can be customized; the rover presented in this study was equipped with a dual-frequency GPS receiver and a digital SLR camera for constructing digital elevation models using structure-from-motion (SfM) photogrammetry. We deployed this prototype rover on the Northeast Greenland Ice Stream to map local variations in snow accumulation and surface topography. The rover conducted four autonomous missions based out of the East Greenland Ice-Core Project (EastGRIP) camp during July 2017, measuring surface elevation transects across the hazardous ice-stream shear margins. During these missions, the rover proved capable of driving over 20km on a single charge with a drawbar pull of 250N, sufficient to tow instrumentation of up to 100kg. The rover also acquired photographs that were subsequently used to construct digital elevation models of a site monitored for spatiotemporal variability in snow accumulation, demonstrating adequate stability for high-resolution imaging applications. Due to its low cost, low-power requirements, and simple modular design, mass deployments of this rover design are practicable. Operation of the rover in hazardous areas circumvents the substantial expense and risk to personnel associated with conventional, crewed deployments. Thus, this rover is an investigatory platform that enables direct exploration of polar environments considered too hazardous for conventional field expeditions.

UR - http://www.scopus.com/inward/record.url?scp=85067119371&partnerID=8YFLogxK

U2 - 10.5194/gi-8-149-2019

DO - 10.5194/gi-8-149-2019

M3 - Journal article

AN - SCOPUS:85067119371

VL - 8

SP - 149

EP - 159

JO - Geoscientific Instrumentation, Methods and Data Systems

JF - Geoscientific Instrumentation, Methods and Data Systems

SN - 2193-0856

IS - 1

ER -

ID: 230422810